03-15-2012, 11:18 AM
|
#1
|
|
Registered User
Join Date: Apr 2010
Location: Canada
Posts: 3,153
|
anguished over the issue, but we are talking 1100 kms north of edmonton. tarret says that with pss9's i could actually get a 1" lift which would allow for more rubber on the car, as well as better clearance. i could brace the front and rear struts and fab some sort of guard to protect the exposed brake/clutch and vacuum lines, but i still would have a car good for 4 months a year max; wrx sti goes all year long. sorry for the hijack, but i appreciated the 350z/boxster comaprision and would like to see more, at least to help me separate fact from fiction in the eternal euro/asia debate.
|
|
|
03-15-2012, 11:30 AM
|
#2
|
|
2006 987
Join Date: Dec 2006
Location: st. louis
Posts: 443
|
Quote:
Originally Posted by The Radium King
sorry for the hijack, but i appreciated the 350z/boxster comaprision and would like to see more, at least to help me separate fact from fiction in the eternal euro/asia debate.
|
really? I had an opportunity against a new (2008+) Maxima (290hp) and easily outpaced it. G35 (280 to 298hp depending on transmission) also on track, again could not keep up with 986 2.5, probably because they weigh a lot more than 2.5 and I have a manual.
C6 Corvette.... encounter was brief, but he was faster  although not as much as I would have imagined
again all encounters were at 60+ mph. Had we started from 0 the results may have been different.
love my 986, best bang for buck by far
Last edited by 986_inquiry; 03-15-2012 at 11:33 AM.
|
|
|
03-15-2012, 11:54 AM
|
#3
|
|
Registered User
Join Date: Nov 2010
Location: Philly
Posts: 594
|
I raced my buddies modified 2004 350z with my stock 217HP 2.7L.
My friend had full exhaust system with test pipes, Short Ram Intake, Plenum Spacer Upgrade, lowered suspension, lighter than oem rims. Estimating 300HP+.
We raced from 40mph to 120mph. In the end, he beat me by 2-3 car lengths. Pretty close race.
But now he bought an 06 M3 and sold the plenum spacer and test pipes off his 350z and I got an Intake, test pipes and UD Pulley for my 2.7L. Time for a rematch. Hopefully before his 350z gets sold. I think I can win.
On paper, the 0-60mph time and the 1/4 mile times are both 0.3 seconds apart when comparing the 350z and the 986 2.7 engine. Which means off the line, the 350z is quicker, but acceleration is the same after that.
|
|
|
03-15-2012, 01:04 PM
|
#4
|
|
2006 987
Join Date: Dec 2006
Location: st. louis
Posts: 443
|
Quote:
Originally Posted by ProjectM96
I raced my buddies modified 2004 350z with my stock 217HP 2.7L.
My friend had full exhaust system with test pipes, Short Ram Intake, Plenum Spacer Upgrade, lowered suspension, lighter than oem rims. Estimating 300HP+.
We raced from 40mph to 120mph. In the end, he beat me by 2-3 car lengths. Pretty close race.
But now he bought an 06 M3 and sold the plenum spacer and test pipes off his 350z and I got an Intake, test pipes and UD Pulley for my 2.7L. Time for a rematch. Hopefully before his 350z gets sold. I think I can win.
On paper, the 0-60mph time and the 1/4 mile times are both 0.3 seconds apart when comparing the 350z and the 986 2.7 engine. Which means off the line, the 350z is quicker, but acceleration is the same after that.
|
The more I drive different types of vehicles, the more I realize that 0-60, quarter mile and horsepower don't mean that much.
for example, parents have a hybrid Highlander. Nothing much on paper, but stomp on the pedal and from 0-30 it's a rocket ship. I think it's those electric motors, instant massive torque.
Horsepower doesn't mean much either since it's a maximum number. 300hp sounds great, but if you only get that at 6500rpm then that's not as useful as, say, 300hp at 4500rpm, with 2000rpm to go.
Also minor mods can make a huge difference. Your friend's mods might not sound like much, but adding just 5-10 hp from 2000 to 6000rpm can make a huge difference. Dyno on K&N's website does a good job of showing that:
2007 and 2008 Nissan 350Z Gains 8.17 Horsepower with K&N Performance Air Intake System
Had he not modified his 350z I have a feeling you would have been probably right next to each other from 40-120mph
I've seen inexpensive headers on ebay, think I'll give them a whirl, and look for any other inexpensive mods. Not because the 986 is slow, but because it has a lot of hidden potential
|
|
|
03-15-2012, 04:02 PM
|
#5
|
|
Registered User
Join Date: Nov 2009
Location: mass
Posts: 731
|
this reminds me of the day a dodge challenger big v8 thing with this insane exhaust came screaming up my ass as I am entering one of my favorite twisty roads. i even slowed down a bit and waited for the first set of turns. then just went for it. when i got to the end of the road, still moving real good i looked back , he was not there. i took a right after a stop sign and he was coming up behind me , seemed like it took him forever to catch up. Boxster on a back road with no straights tooled him. that's what the Boxster is all about not that straight line crap !
|
|
|
03-16-2012, 06:37 AM
|
#6
|
|
Registered User
Join Date: Nov 2010
Location: Philly
Posts: 594
|
Quote:
Originally Posted by 986_inquiry
I've seen inexpensive headers on ebay, think I'll give them a whirl, and look for any other inexpensive mods. Not because the 986 is slow, but because it has a lot of hidden potential
|
Just be careful with those cheap ebay headers. I heard horror stories. They are cheap because they don't fit perfectly. You will most likely need to bend them into place. And they don't include cats so the CEL light will turn on and you won't pass emissions.
The cheapest street legal performance headers with sport cats I know of are from NHP. $999 I think. I plan to get them when I save up the money.
But yeah the 350z engine also has lots of potential. He also shifted gears much faster than me since he was more experienced with racing than I was. He matched his 350z's advertised 1/4 mile at the drag strip when it was still stock. I was afraid of shifting too fast because I didn't want to accidentally let the shift knob go while it was only half way in gear. But I am getting more and more used to shifting faster.
Last edited by ProjectM96; 03-16-2012 at 06:39 AM.
|
|
|
03-15-2012, 12:48 PM
|
#7
|
|
Registered User
Join Date: Oct 2011
Location: Olympia, Wa
Posts: 370
|
Quote:
Originally Posted by 986_inquiry
really? I had an opportunity against a new (2008+) Maxima (290hp) and easily outpaced it. G35 (280 to 298hp depending on transmission) also on track, again could not keep up with 986 2.5, probably because they weigh a lot more than 2.5 and I have a manual.
C6 Corvette.... encounter was brief, but he was faster  although not as much as I would have imagined
again all encounters were at 60+ mph. Had we started from 0 the results may have been different.
love my 986, best bang for buck by far
|
I drove few different G35 coupes...they are a nice car but not near as fast as the HP numbers suggest...I drove both a 6 spd and an auto
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -8. The time now is 09:01 PM.
| |