Another P1128 and p1130

[DaveRad]

Originally Posted by JFP in PA

Do you have a multimeter? If so, check the continuity of the wiring from the MAF to the DME; this is exactly what the OBD II manual for your car says to do if you get P0102

I do. Where would I find that connection?

[JFP in PA]

Originally Posted by DaveRad

I do. Where would I find that connection?

OK, disconnect the harness at the MAF and at the DME. Pin #4 at the MAF end is the same as pin #47 at the DME, test it for continuity; pin #5 at the MAF end is the same as pin #17 at the DME end, test it for continuity. Then test both wires for a short to ground. If everything passes, it isn't the harness, if any wires fail, you need to find the break or ground and repair it.