rear drive axles replacements ..

[steved0x]

Originally Posted by jaimster

thank you Guys ,

I'm going to try banging them around a bit maybe they will loosen up ! if that doesn't work I will have to take them apart again .
another question :

are the end components on both inner axles interchangeable ?

When reassembling the CV joint if the center part goes in the wrong way it will bind up. There is a video somewhere on youtube that shows the right orientation and the wrong one. This might be the video, apologies if I have found the wrong one.

https://www.youtube.com/watch?v=b97EjaR_btw

[jaimster]

Originally Posted by steved0x

When reassembling the CV joint if the center part goes in the wrong way it will bind up. There is a video somewhere on youtube that shows the right orientation and the wrong one. This might be the video, apologies if I have found the wrong one.

https://www.youtube.com/watch?v=b97EjaR_btw

wholy cow ! wish I had searched for this right procedure and found this video
I did it wrong - I'm going To take them apart tomorrow and DO THEM RIGHT tomorrow

really appreciated Steved0x..