Ideas for diagnosing air bag light

[mtb50]

Originally Posted by sfkjeld

Any suggestions on where to start? I replaced the grommets under the air bag 6 months ago due to the horn going off. But it seemed to go ok, no light anyway. Until about a month ago when it went on. I had an issue a few years ago with the wiring harness under the drivers seat. It became partly disconnected. It’s connected now but it seems fragile. Can that effect the air bag light?

Just trying to figure out where to start.

My problem was under the seat plug in. I did both seats. I cleaned them with electrical cleaner and so far so good.

[sfkjeld]

Originally Posted by mtb50

My problem was under the seat plug in. I did both seats. I cleaned them with electrical cleaner and so far so good.

Sorry, I just saw your reply.
I am suspecting the plug under the drivers seat. Had an issue with it a few years ago. Super tight space tho. Did you remove the seat?

[mtb50]

Originally Posted by sfkjeld

Sorry, I just saw your reply.
I am suspecting the plug under the drivers seat. Had an issue with it a few years ago. Super tight space tho. Did you remove the seat?

I did remove the seat because of the immobilizer. You might try loosening the rear bolts and remove the front ones and pry something to hold it up. Let us know.