Gold Flakes in Oil and Age of Motor?

[maytag]

Originally Posted by BYprodriver

You will need at least 2 good rods & most likely a whole set of rod bearings & ARP rod bolts. A gasket set is about $300, ARP rod bolts $160, bearings $125., Rods ?? You are looking around $1,000 minimum since you want to do whatever you can while you are in there. Plus labor!!

Rings?
Are these cylinders nikasil'd, Or should they be honed?


Sent from my SM-G970U using Tapatalk

[Gilles]

Originally Posted by maytag

Rings?
Are these cylinders nikasil'd, Or should they be honed?


Sent from my SM-G970U using Tapatalk

Maytag, I believe the cylinders are coated with Lokasil (sadly Not Nikasil) and the concern is that they may be 'oval' not round.

Ideally would be to get the LN Nickies but they would increase the cost of the rebuilt..
.

[maytag]

Originally Posted by Gilles

Maytag, I believe the cylinders are coated with Lokasil (sadly Not Nikasil) and the concern is that they may be 'oval' not round.



Ideally would be to get the LN Nickies but they would increase the cost of the rebuilt..

.

Thanks.


Sent from my SM-G970U using Tapatalk

[Starter986]

Originally Posted by maytag

Rings?
Are these cylinders nikasil'd, Or should they be honed?


Sent from my SM-G970U using Tapatalk

Haven't yet you noticed ****stick is ignoring our inquiries?