Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 03-28-2020, 03:55 AM   #1
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,085
If you're going to keep the car... I'd go with BYProdriver's motor.

Yup.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 03-28-2020, 06:29 AM   #2
Registered User
 
Join Date: Jul 2017
Location: Tucson AZ
Posts: 536
Quote:
Originally Posted by Starter986 View Post
If you're going to keep the car... I'd go with BYProdriver's motor.

Yup.
It's 3.6 liter, with all the goodies. Basically a Raby engine. He wants $15k for it. All in, including shipping, duties, and installation, you're looking at $20k. I don't know what you should do, 400 hp does require that something be done about the transmission, and the rest of the drivetrain. Fire breathing monsters DO require heavier duty components.:troll:
__________________
2001 Boxster
2007 Toyota Highlander
2003 New Beetle Convertible, Turbo, Tip 6 speed
Brian in Tucson is offline   Reply With Quote
Old 03-28-2020, 07:37 AM   #3
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
How mechanical are you? I see you got it to that point. Mine looked exactly the same. I sent the block halves to L&N to sleeve It's about $4500 and 2 months. You can reassemble with $1000 in special tools. Parts seal kit from Ebay $300 and a service manual PDF. I have a 99-02 copy you can have. Rod bearings are about $100 a set. Piston rings, Pistons, wrist pins come in L&N package. $45 Harbor freight engine stand, and a $119 jack-table, $100 for a jack and jack stands, which I'm guessing you already have since the motor is out.


I neglected to say you may a tune $1000 to 1500. There are several dozen folks on here that have done this with good results my self included.
Good Luck
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust

Last edited by jsceash; 03-28-2020 at 07:46 AM.
jsceash is offline   Reply With Quote
Old 03-28-2020, 07:48 AM   #4
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
Quote:
Originally Posted by jsceash View Post
How mechanical are you? I see you got it to that point. Mine looked exactly the same. I sent the block halves to L&N to sleeve It's about $4500 and 2 months. You can reassemble with $1000 in special tools. Parts seal kit from Ebay $300 and a service manual PDF. I have a 99-02 copy you can have. Rod bearings are about $100 a set. Piston rings, Pistons, wrist pins come in L&N package. $45 Harbor freight engine stand, and a $119 jack-table, $100 for a jack and jack stands, which I'm guessing you already have since the motor is out.


I neglected to say you may a tune $1000 to 1500. There are several dozen folks on here that have done this with good results my self included.
Good Luck
Now you're talking. I didn't realize raby would do that? I thought he was an "all or nothing". If this is an option, I'd go that way!

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 03-28-2020, 07:58 AM   #5
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
Quote:
Originally Posted by maytag View Post
Now you're talking. I didn't realize raby would do that? I thought he was an "all or nothing". If this is an option, I'd go that way!

Sent from my SM-G970U using Tapatalk
It's still listed on L&N web page check into it. Mine was done in 2012. I pulled it in 2014 and added the carillo rods and 06 heads. I found tracking the engine over revved very quickly and I wanted the extra weight reduction plus strength the rods offered. The heads were all but new from a wrecked 06 8000 miles. $750 each. Much cheaper than a head job. I apologize the new web price is $5095
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust

Last edited by jsceash; 03-28-2020 at 08:01 AM.
jsceash is offline   Reply With Quote
Old 03-28-2020, 08:57 AM   #6
Registered User
 
Join Date: Feb 2017
Location: Stockholm
Posts: 375
Garage
Tricky..

My 5 cents: Don't look at the Business Case, just pay and have fun! Life isnīt endless!

I have most likely spent at least 10k extra on my car now if I would dare to count it, but hey, Iīm having a lot of fun!
Robert986 is offline   Reply With Quote
Old 03-28-2020, 09:16 AM   #7
Registered User
 
jsceash's Avatar
 
Join Date: Aug 2009
Posts: 1,466
Garage
Quote:
Originally Posted by Robert986 View Post
Tricky..

My 5 cents: Don't look at the Business Case, just pay and have fun! Life isnīt endless!

I have most likely spent at least 10k extra on my car now if I would dare to count it, but hey, Iīm having a lot of fun!
Agreed, I'm fairly sure I have spent over $30K but the car on track is such a rush. If I were to start over today it would probably be $40K.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
jsceash is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page