Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-06-2019, 12:22 PM   #1
Registered User
 
Join Date: Aug 2019
Location: Montreal, Canada
Posts: 6
Another Spacer Question

Hi ...I recently installed ECS 20mm spacers to the rear wheels of my 2001 Boxster base.
The spacers are perfect on all counts.
I have oem 17 inch wheels with 205/50/17 tires. I now wish to install spacers on the front wheels...i tried the 20mm spacer but it rubbed on the wheel well on maximum turning position.
Could someone please advise the size of the spacers i should go with in front.
Many thanks...Gerry
Gerry4444 is offline   Reply With Quote
Old 10-06-2019, 12:33 PM   #2
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
I run 13mm, but I'm a 225 on the front.

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 10-06-2019, 01:44 PM   #3
Registered User
 
Join Date: Aug 2019
Location: Montreal, Canada
Posts: 6
What difference does a 225 and 205 make wrt the spacer size...newbie here...thanks
Gerry4444 is offline   Reply With Quote
Old 10-06-2019, 03:40 PM   #4
Who's askin'?
 
maytag's Avatar
 
Join Date: Mar 2018
Location: Utah
Posts: 2,448
Quote:
Originally Posted by Gerry4444 View Post
What difference does a 225 and 205 make wrt the spacer size...newbie here...thanks
My 225 tire is 20mm wider than your 205. So you may have up to 10mm more room than I do, before it rubs, depending on where it runs and under what conditions.

Sent from my SM-G970U using Tapatalk
maytag is offline   Reply With Quote
Old 10-06-2019, 04:47 PM   #5
1998 Boxster Silver/Red
 
Join Date: Sep 2017
Location: 92262
Posts: 3,084
I run 20 rear, 15 front. Still waiting for someone to trade me my 15mm ECS with bolts for a pair of 23s.

You could have your fenders rolled. No? That should give you room. Or, just run with the 15's. It works.
__________________
1998 Porsche Boxster
Starter986 is offline   Reply With Quote
Old 02-22-2022, 04:13 PM   #6
Registered User
 
Join Date: Mar 2017
Location: Los Angeles
Posts: 356
Spacer size?

What size wheel spacers do I want to run if I have 275/40 ZR17 98W on the rear and 245/40 ZR17 91W on the front? And what about lug nuts? Thanks.
robdelorenzo is offline   Reply With Quote
Old 02-23-2022, 12:17 PM   #7
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,981
Quote:
Originally Posted by robdelorenzo;644968 [B
And what about lug nuts? [/B]Thanks.
Rob, please be aware that you Will need longer lug nuts if you use wheel spacers and I would not go too wild as the spacers definitely tax your hub bearings and even if these are easy to replace them, the job is Not a fun one..
.
Gilles is online now   Reply With Quote
Old 10-06-2019, 02:24 PM   #8
Registered User
 
SC-986's Avatar
 
Join Date: Oct 2011
Location: Upstate, SC
Posts: 109
Garage
I run 15 mm spacers all the way around on my ‘04 S with no rubbing issues.
__________________
2002 Boxster base - Seal Grey, 5spd trans.,ROW M030 upgrade, FVD Brombacher software tune
2004 550 Spyder Anniversary Edition, #1541,Tip, TechnoFix DOF IMSB upgrade
SC-986 is offline   Reply With Quote
Old 02-27-2022, 07:41 AM   #9
Registered User
 
Join Date: Oct 2020
Location: KY
Posts: 1,214
I don't remember off the top of my head, but the owners manual mentions 19mm (I think) spacers on the rear wheels as a factory option, and I have seen these Porsche spacers for sale. This led me to think that while that spacers do change suspension geometry (and hence wear), they were factored into the design at least somewhat when the cars were put together. I've got 15 up front and 25s on rear and they're been there for 4 years / 20k miles without issue.

Sent from my SM-G970U1 using Tapatalk
__________________
2000 Box Base, Renegade Stage 1 performance mods complete, more to come
When the owners manual says that the laws of physics can't be broken by this car, I took it as a challenge...
ike84 is offline   Reply With Quote
Old 02-28-2022, 07:21 AM   #10
Registered User
 
Join Date: Mar 2017
Location: Los Angeles
Posts: 356
Thanks for mentioning that. I noticed that a website was selling Porsche Branded Spacers for Boxsters, but they were sold out and back ordered. So the engineers must have considered these ti be deemed ok.
robdelorenzo is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 12:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page