Spacer question

[DWBOX2000]

Does 260 sound right for 4 15mm spacers and lugs?
Any before and after pictures?

[deathsled986]

Originally Posted by DWBOX2000

Does 260 sound right for 4 15mm spacers and lugs?
Any before and after pictures?

I bought 4 15mm spacers with extended lug bolts for $54 shipped off eBay last year. It's just a simple machined plate so it's not really hard to get right (and yes I did get hubcentric ones). $260 is WAY too much for what you're getting. I've had them off and on several times and have been pretty rough on the car including thrashing it on the Tail of the Dragon. The bolts are doing just fine.

Originally Posted by Anker

Spacers will increase camber because if the lengthened lever arm of the suspension, and with the increased camber you also get a change in toe-in. Whether you change them enough to go out of spec is another question.

Untrue. Alignment does not change with spacers just as alignment doesn't change if you install wider wheels and tires.

[BoxsterSteve]

I was just under $130 for the stud conversion kit and 4 15mm hubcentric spacers.

[DWBOX2000]

Originally Posted by BoxsterSteve

I was just under $130 for the stud conversion kit and 4 15mm hubcentric spacers.

Which ones did you get? Thanks

[BoxsterSteve]

Originally Posted by DWBOX2000

Which ones did you get? Thanks

Check for PM.

[maytag]

Originally Posted by BoxsterSteve

Check for PM.

Awww.... c'mon am Steve! We'd all like to know! Hahaha.

Seriously.... I'm following the thread for this purpose. So if you're not comfortable posting here, would you mind pm'ing me as well?

Thanks

Sent from my SM-G930T using Tapatalk

[BoxsterSteve]

Re: Spacer overload...
Quote:
Originally Posted by BoxsterSteve
I got these from eBay vendor wheel_parts_usa for $55 & free shipping.
They can accept up to a 15mm spacer.

https://www.ebay.ca/itm/142462191262?ul_ref=https%253A%252F%252Frover.ebay .com%252Frover%252F0%252Fe11051.m43.l1123%252F7%25 3Feuid%253De8676fb085f14761aad6775fb3bc55b2%2526bu %253D43162050109%2526loc%253Dhttp%25253A%25252F%25 252Fwww.ebay.ca%25252Fulk%25252Fitm%25252F14246219 1262%2526sojTags%253Dbu%253Dbu%2526srcrot%253De110 51.m43.l1123%2526rvr_id%253D0&ul_noapp=true

I messaged the vendor to ask some specific questions.
He confirmed they are an R14 ball seat lug nut and the studs & lugs have a 14x1.5 thread pitch, as does Porsche. I may have bought a red herring, but I reasoned that if the thread pitch and lug nut seat are the same spec as my car, I may not have screwed myself.


Spacers were from eBay vendor titanwheelacc. They don’t have the set I bought up for sale currently; but I bought a set of 4 15mm hubcentric 5x130 spacers to fit Porsche & Audi. They cost me $62 & free shipping.


As of yet, I haven’t got the goods in my sweaty little hands.
In laws come home from FL end of next week, so I hope to have installation complete as soon as the pull out of my driveway.