Boxster Bumper Covers

[TriGem2k]

Originally Posted by Ghostrider 310

Thanks but I'm looking to replace the entire front cover, my boxster was used and the only visible flaw I could find was a small crack in the cover, since I'm replacing it I thought I'd investigate all the possible options including a stock exchange.

I gave the wrong addy in my first post it's

GTmotorsport.net

I've replaced both front and rear covers on my car. My front is a GT3 Bumper MKI the MKII that you specify comes from the newer cars and is more than likey a fiberglass remake that has the headlight cut outs to fit the boxster. I would highly recommend you stay factory and go with the GT3 MKI as it is a direct bolt on. I did the install myself. The first time i removed the cover it took about 30 mins off and 30mins on. It really simple. Ive done it afte that just to clean around the radiators and it takes 10mins to get it off and 10mins to put it back on.

If you are interested in the MKI bumper check out the picture in my signature. I pursched my parts from Dayton at DPS Parts.

Good luck,
James DeMircift