The powder coat was $200 but I had a friend who works at a powder coat place do it for me so it could be on the cheaper side. Over all I really like the color and the way it turned out. They did not have any spray paint for the centers and I don’t think color match is gong to be an option. I was thinking maybe black center caps to give a good contrast for the emblem. I do have two extra center caps to experiment with. The other option would be to have some thin stainless or aluminum cut at my work then coated the same color, epoxy it down to the existing centercaps and epoxy the existing logos.
The car is getting aligned this week. I already drilled/ground the top strut mounts. That and now the front 225mm tires are mounted on the 8.5” wheel most of the understeer should be dialed out. I’m getting excited!
Threaded Mode
