Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 10-07-2017, 09:46 AM   #1
Registered User
 
Join Date: Aug 2017
Location: Volo
Posts: 33
Quote:
Originally Posted by Boxstard View Post
Looks nicely lubed up to me.. exactly what I am hoping for my car every time I rev it up and kick some oil up there. No excessive play you can feel on the inner lace?
Thanks for the photo- now i know what IMS bearing looks like w/o the seal with oil inside. I plan on keep driving till need a clutch or rear mail seal then i will probably replace the IMS bearing. Rear seal has a very minor leak. I got 03 boxster 73K miles 5 spd. Just did oil change and air cleaner filter replacement last weekend. I will cut the old oil filter and check for bearing shavings. no service history just got the car w/70k miles 4-5 months ago.
JOC IN IL is offline   Reply With Quote
Old 10-07-2017, 02:03 PM   #2
Registered User
 
Join Date: Mar 2017
Location: DC Area
Posts: 7
78.5K miles on my '05 with the original IMS. Like many have stated in this thread, I'll treat it like a wear item and replace it when I replace the clutch and RMS. Seems like a waste to go to all that effort to simply swap out the IMS. If she pops, I'll gladly replace the engine for a newer, more powerful version, since the rest of the car is in fantastic shape.
Krooked is offline   Reply With Quote
Old 10-27-2017, 03:27 PM   #3
Registered User
 
Join Date: Jun 2017
Location: West Hollywood, CA
Posts: 54
115k still on original IMS

I discussed this with my indy when I first took it to him for service after I purchased. He's worked on Porsches for decades, first in a dealership and then on his own, and strongly recommended against, even at a clutch change. Basic feeling was, those that would fail have failed already, based on all his observations of the many that have come under his wrenches since the introduction of the Boxster.

One hears a lot about how essential it is to replace the bearing but not about real world, current, failures. I'm of a mind to chalk this up to a great marketing job by the manufacturer rather than a real need at this point.
bmsamson is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page