Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 05-19-2017, 07:45 AM   #1
Registered User
 
Join Date: Dec 2009
Location: Orange County, CA
Posts: 1,994
Pidj as said below, there are several ways to lift your car, it is a matter of personal preference.

Whenever I need to get the four wheels off the ground (and level), usually I drive onto the ramps, then lift the opposite side with a floor jack, get the stands on and afterwards lift the end from the ramps and get it on the stands as well.

It may seems that you are duplicating your work but I find this a safe way to do it.

However, once the car is supported with the four stands, I give it a firm shake from side to side (both ends), to ensure that the vehicle is properly seated on the floor stands.

I already got a very close call, and you cannot take a chance because if the car falls while you are underneath, most likely you will not be able to get out of the way.... and will be very messy :-(

Please ensure that the car is 100% stable before you get under it...!

Last edited by Gilles; 05-19-2017 at 07:50 AM.
Gilles is online now   Reply With Quote
Old 05-19-2017, 07:55 AM   #2
Registered User
 
pidj's Avatar
 
Join Date: Feb 2017
Location: Acton, ON
Posts: 257
I've never used ramps, but that makes sense for getting one end up, straight. I do have 4 jack stands, and always test before getting under
__________________
-------------------------------
2001 Boxster S, Guards Red
pidj is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page