Spin on oil filter leak.

[Meir]

guys thank you all for the replies.
i was a bit puzzled because i was doing the same procedure for the past 6 years with no issue. so i guess i'm becoming weak and old just like steve .
i will take JFP advice and will give it another half a turn with the cup and a wrench.
thanks again.

[steved0x]

Originally Posted by Meir

. so i guess i'm becoming weak and old just like steve ..

Old guy problems at least we are on the right side up

[thom4782]

Hi Meir:

I know you said the filter was loose, but are you 100% sure its the filter that's leaking and not the adapter itself. A deteriorating or pinched o-ring can lead to a adapter leak.

[Meir]

Originally Posted by jcslocum

Make 100% certain that an old rubber gasket isn't stuck up there on the adaptor. This happens and will cause the leak.

Good point. I will look at that.

Originally Posted by thom4782

Hi Meir:

I know you said the filter was loose, but are you 100% sure its the filter that's leaking and not the adapter itself. A deteriorating or pinched o-ring can lead to a adapter leak.

That was my first assumption, so I ordered new seals from LN.
Also a chance to tanks the guys at LN for shipping the o-rings at no cost at all.
So new seals going on regardless, but I always needed the cup to remove the filter.
Never by hand.