Heater box removal

[Walshie]

Originally Posted by Meir

got it.
in that case, it could be from this seal:



if the seal is fine, pay attention to the lower bolt.
i didn't have any leaking issues, but you can see from the picture that the bolt is a bit rusted at is base, evidence of it being in contact with a lot water.

good luck, and keep us posted.
i'm really curios to see where the lick is coming from once you find it (and i'm sure you will).

Found it. The leak is coming in around the black steel panel that is bonded to the bulkhead, has anyone ever tried to remove this.. Thanks to meir for all his help. We couldn't have done this without you.# legend