Drilling out easy out

[DWBOX2000]

Front end is lowered. Thanks everyone for your help and patience.
David

[Jamesp]

Originally Posted by DWBOX2000

Front end is lowered. Thanks everyone for your help and patience.
David

This is a priceless thread. Folks who have never machined anything in their lives giving sage advice. Olive oil! Bwha ha ha ha ha!!!!! Brilliant!!! WD 40?!?! Hope you're looking for some nice loose threads! What a bunch of jokers! Hey, Ive got some vegetable oil I could spare... I'm sure somebody out there has some K-Y, or maybe consider the right tool for the job, cutting oil. Almost like it was made for just such an application. I'm glad to see you ditched the primitive Pete's and are doing the job right. A textbook example of folks giving bad advice on the forum.

Now to be completely fair, a crappy thread cutting job for you application really doesn't matter, but if you were cutting threads where fit mattered olive oil advice is deadly.

[particlewave]

Originally Posted by Jamesp

This is a priceless thread. Folks who have never machined anything in their lives giving sage advice. Olive oil! Bwha ha ha ha ha!!!!! Brilliant!!! WD 40?!?! Hope you're looking for some nice loose threads! What a bunch of jokers! Hey, Ive got some vegetable oil I could spare... I'm sure somebody out there has some K-Y, or maybe consider the right tool for the job, cutting oil. Almost like it was made for just such an application. I'm glad to see you ditched the primitive Pete's and are doing the job right. A textbook example of folks giving bad advice on the forum.

Now to be completely fair, a crappy thread cutting job for you application really doesn't matter, but if you were cutting threads where fit mattered olive oil advice is deadly.

I know you're not referring to me since you know that I'm an engineer and have been machining and turning wrenches for 20 years. Or did you forget?

You don't need cutting fluid for a 1/8" job, as you just stated (and contradicted yourself).
Have you been drinking?

BTW, a proper engine rebuild would have included an ultrasonic bath (or does doing things by the book only apply to others?).

#dontinternetdrunk

[B6T]

In my experience, you want to use cutting oil on smaller threads even if not absolutely required because you'd want to use the lubrication to be able to determine when the tap is cutting and when the tap is bottomed out and about to break, or jamming up with swarf and about to break, which is easy to do because M6 taps aren't very strong.