Quote:
Originally Posted by JFP in PA
it is a 5 min. project to put the hole in the plate in the correct location. I also like to de-burr the opening, both to give it a more finished look and keep the plate from cutting your fingers the next time you service the trans.
|
I did this on my 03 S 6 speed manual with the piece in the place. I was within a 1/2 inch of dead centre of the drain plug with a pilot hole and then lined up more precisely to drill the larger hole. I de-burred the hole with a Dremel tool. I'm not sure why Porsche didn't have a hole incorporated into the piece in the first place.
Hybrid Mode
