Quote:
Originally Posted by rick3000
Thanks to everyone for the input.
jsceash, what would you say the difference in diameter between the base and S hose is? I would think clamping the bigger hose down would leak, but you are proof to the contrary.
I wonder what the dealer does when someone comes in with one of the old retrofit kits installed that had the y hose sized for the base hard lines?!
|
There was about 1/8" (3MM) difference.
In answer to your second question if it's not a Porsche part they won't want to touch it (Mine is all Porsche part numbers). With a "Y" metal adaptor your probably on your own they won't have a hose to fit and won't want to be responsible to cut one.
__________________
2003 Black 986. modified for Advanced level HPDE and open track days.
* 3.6L LN block, 06 heads, Carrillo H rods, IDP with 987 intake, Oil mods, LN IMS. * Spec II Clutch, 3.2L S Spec P-P FW. * D2 shocks, GT3 arms & and links, Spacers front and rear * Weight reduced, No carpet, AC deleted, Remote PS pump, PS pump deleted. Recaro Pole position seats, Brey crouse ext. 5 point harness, NHP sport exhaust
|
Threaded Mode
