Car will not start?

[Timco]

Originally Posted by healthservices

ok hopefully you got the wrong two spots you are jumping.

This is the fuel relay on mine...




This is the relay wires that are jumped...



And this is the two slots that you actually jump with a jumper wire to get the pump to operate ...

On mine, 30 & 87 are the edge slots, or the other two. It's also depicted that way on the schematic on the back. I'll look at the numbers on the face. I sure hope I got it wrong too, friends.

As for the fuse, I can assure you it was checked!

[healthservices]

Originally Posted by Timco

On mine, 30 & 87 are the edge slots, or the other two. It's also depicted that way on the schematic on the back. I'll look at the numbers on the face. I sure hope I got it wrong too, friends.

As for the fuse, I can assure you it was checked!

I think you have the wrong relay as pelican shows this...




Your car is one of those right?

If it is then we use the same relay. And if we use the same relay then 30 and 87 are these...




And looking at the fuse box it would be one standing up and one laid down in the middle of the square and at the bottom of it....

like this...