Fighting with air/oil separator

[CraigM]

Oh, and my arms were twisted around in some funky ways up there, but it is possible to do without removing anything major.

[cas951]

There's a nice write up by Brad Roberts a few years ago.
http://986forum.com/forums/159178-post17.html

http://986forum.com/forums/general-discussions/18090-air-oil-seperator-write-up-4.html

See if you have a new hose with the new AOS (See Attached pic). If you do have a new hose just cut the old hose instead of trying to loosen the clamp. This will save you a lot of time and having to buy a special tool. When reinstalling I used a standard clamp and used a socket to tighten.

[clickman]

http://986forum.com/forums/diy-project-guides/50363-aos-replacement-tips.html