Has anyone actually DIY chain tensioner pads? - 986 Forum - The Community for Porsche Boxster & Cayman Owners

NewArt · 10-19-2013, 12:27 PM

I can see how the "u" base could be useful. Don't seem to have it at Can Tire; trying Kijiji and others. I'm a big fan of homebuilt tools and I have access to a shop.

NewArt · 10-23-2013, 02:22 PM

Some of your have followed my quest for info about dropping the engine and doing a chain tensioner swap/upgrade/replacement. I have seen references to the Porsche factory chain tensioner tool 9599 which is apparently quite expensive and, if I understand correctly, unnecessary according to Wayne Dempster's book: "If you do not have this extremely expensive tool (upper right inset of Figure 24), you can tighten up the tension on the chain using the regular chain tensioner. Reinstall the tensioner completely into the bottom of the case."
So, do I do, or do I don't need this? If you have any experience with this please let me know.

pjq · 10-24-2013, 07:39 AM

with my rebuild we followed Jake R. method and precharged the actual chain tensioners with a heavy weight oil (pour oil into a bowl to a level that will cover the tensioner, place tensioner in bowl and with fingers squeeze tensioner in and out displacing any old oil and replacing with new heavier weight oil from bowl).

If I recall you should be able to search this sight, renntech and rennlist to find out more on this topic "chain tensioner tool 9599".

pjq · 10-24-2013, 07:43 AM

Newart i was thinking of you yesterday when I saw engine supports on sale at princess auto, $69 i think, good price.
Princess Auto just opened in S.J. only about 8 months late for me.

NewArt · 10-24-2013, 09:21 AM

Yeah, I saw that too

Actually, I've located one for sale on Kijiji locally for $50. Closest Princess is at Ottawa (2 hour drive).

Jake Raby · 10-24-2013, 10:08 AM

Quote:

Originally Posted by pjq

with my rebuild we followed Jake R. method and precharged the actual chain tensioners with a heavy weight oil (pour oil into a bowl to a level that will cover the tensioner, place tensioner in bowl and with fingers squeeze tensioner in and out displacing any old oil and replacing with new heavier weight oil from bowl).

If I recall you should be able to search this sight, renntech and rennlist to find out more on this topic "chain tensioner tool 9599".

Making sure that oil is warm, makes a huge difference.. Just warm enough to burn you and not hot enough to produce any smoke and you are just fine!

I also use a lightweight oil, not a heavy weight.