Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 02-28-2013, 08:09 AM   #1
Registered User
 
Join Date: Feb 2013
Location: Avon Lake, Ohio
Posts: 1
Convertible Top Push Rod Information

1997 Boxster:
Have any of you had any experience with the tapered head bolt and brass cam that anchors the end of the push rod to the transmission arm for the convertible top?

Specifically, is that bolt supposed to be tightened down completely to some torque value, or left a bit loose, maybe with a bit of blue lock-tite on the threads so that the brass cam piece can rotate freely on the bolt ?
With it tightened down completely, it seems to distort the rubber bushing piece severely .. Also, there is a punch mark in the brass cam piece is that supposed to line up with anything?

As you might imagine, I purchased the car used with a hard top on it and found both the rubber bushings on the push rod were in need of replacement when I got into the convertible top. One busing was disintegrated, lying in pieces in the top storage area. The other one was ready to fall off.

Thank you for any comments, advice!
boblar



boblar is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page