Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-22-2013, 01:43 PM   #1
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by Porsche Pete View Post
Yep Johnny...Thats the best i could mount...wont go right in as they foul with the strut, so poss a 5mm gap between the hub flange..

Had another look today....Looks an impossible task..These wheels are 11.5 inches across with these tyres.. and imo will look s*** if i fit these with spacers.. Just not the look i want to go for... Oh well already up on FleaBay...should make a couple of bucks into the bargain..?

Plan No. 3

Dont want to shell out on the Oz Wheels if i can help it...too dear imo
Plan 3 is back to my original plan but in 20" wheels...19s no longer available
Have emailed a few outlets already to check if they can supply...??

So 20"
Front 8.5 J X 18 ET 45 or 47 225 or 235/35 Tyres

Rear 8.5 J x 18 ET 45 or 47 255 or 265/35 "


Poss will fit a 15mm spacer on the rear? The 20s are only available in 8.5J and 45 or 47 ET


Looks to be plenty of room in the wheel arches..so think will give a good look..
And will be alot cheaper package..

Pete,

You're going in the wrong direction again. Not only will 20's result in a horrible ride quality, to included a significant amount of added weight, you can't run 8.5's all around - especially with a 265 tire. Let's pause here and start fresh. If you're determined to change wheels and up size, I suggest that you look at ones that fall within the range of 18 & 19 inch. If you come across something that you like, let's go over the specs before you spend any more money. There are plenty of us here on the forum who can help guide you toward the right fitment. Do you mind sharing what budget you have allocated for this project ? There are numerous brands out there that will accomplish the task without any more guess work.
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 02-22-2013, 02:06 PM   #2
Registered User
 
Porsche Pete's Avatar
 
Join Date: Jan 2013
Location: Essex, England
Posts: 159
Yes..i think wise words.. Around £1200 budget. it Was ?? and yes that should read 20"..
Its good to get other opinions...saves wasting money too... Thanks for all yr help guys..

Have put the urgency on myself, as i have already sold my turbine jobbies on Ebay..so the chap will want to know
where they are soon !!

Think i will bite the bullet and go with the ;


Oz Alleggerita HLT Titanium in 18"



FRONT; 18" 8J ET50 225/40 or 235/40 TYRES



REAR; 18" 9J ET 43 255/40 or 265/40 TYRES

Does this sound about right?

No hassle then...all shiny brand new with some Falken 453 ... Tyres
have always liked these...dont settle for 2nds me thinks...may have to sell a kidney or two Lol..
Or better still the wifes..Lol

Last edited by Porsche Pete; 02-22-2013 at 02:39 PM.
Porsche Pete is offline   Reply With Quote
Old 02-22-2013, 05:29 PM   #3
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
How about something like the affordable Victor Zehn wheel ? They have a nice, simple clean look to them, and they're lightweight with a good fitment for a 986. In addition, they're available in both 18 and 19 inch.
Attached Images
   
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 02-22-2013, 06:18 PM   #4
Registered User
 
LAP1DOUG's Avatar
 
Join Date: Aug 2011
Location: USA
Posts: 414
Quote:
Originally Posted by Porsche Pete View Post
Think i will bite the bullet and go with the ;


Oz Alleggerita HLT Titanium in 18"



FRONT; 18" 8J ET50 225/40 or 235/40 TYRES



REAR; 18" 9J ET 43 255/40 or 265/40 TYRES

Does this sound about right?
I have run the OZ Allegerita in an 8.5"et 53 front / 9" et 43 rear combo. for about a year with Dunlop Z1 255 front / 265 rear tres with no problem, other than the front scrapes a bit on the inside wheel liner at full lock. Recently I have fitted the 9" on front with a new Allegerita 10" et 40 rear using Hoosier 245 front / 285 rear with no problems as it sits testing in the garage, but have not yet tuned a wheel in anger this season.

Note: tire sizes such as "245" or "285" are just nominal sizes, and you need to check the true specifications from the manufacturer. Sometimes a "245" can be more line a "250+".
__________________
Kippis

986S
991S
Van Diemen RF97
LAP1DOUG is offline   Reply With Quote
Old 02-22-2013, 06:34 PM   #5
Registered User
 
Porsche Pete's Avatar
 
Join Date: Jan 2013
Location: Essex, England
Posts: 159
Johnny...i owe u a beer ...Will u accept this virtual one...Lol

I saw those wheels and really loved the look of them the first time round...

i dismissed them then as were a bit dearer than others..and was persuing 2nd hand wheels

But hey ho... The satin Black in 19s would look wicked against my Artic Silver

front 8J ET45 rears 9.5J ET 49 And yes.. fitments look better

Bought the same price as the Oz Jobs...but have a contact lead to phone at Rimstyle UK,,,,so will see what my best haggling will do..

Will keep you posted..........Bet they aint got any now ???

Hey its 3.30 in the morning........this bloody car ....!!! Good job its Saturday...err already and no work !!

Last edited by Porsche Pete; 02-22-2013 at 06:37 PM.
Porsche Pete is offline   Reply With Quote
Old 02-22-2013, 07:01 PM   #6
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by Porsche Pete View Post
Johnny...i owe u a beer ...Will u accept this virtual one...Lol

I saw those wheels and really loved the look of them the first time round...

i dismissed them then as were a bit dearer than others..and was persuing 2nd hand wheels

But hey ho... The satin Black in 19s would look wicked against my Artic Silver

front 8J ET45 rears 9.5J ET 49 And yes.. fitments look better

Bought the same price as the Oz Jobs...but have a contact lead to phone at Rimstyle UK,,,,so will see what my best haggling will do..

Will keep you posted..........Bet they aint got any now ???

Hey its 3.30 in the morning........this bloody car ....!!! Good job its Saturday...err already and no work !!

There are plenty of dealers here in the USA who I'm sure would be happy to sell you a set and arrange for shipping if you can't get them through a UK dealer. In fact, I bet Victor themselves would be obliged to do so. Any way, there are at least a couple of members on the forum who have the Zehn wheels, and I've always admired the way they look. Let me know if there's anything else I can do.
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Old 02-22-2013, 06:31 PM   #7
Registered User
 
Johnny Danger's Avatar
 
Join Date: Nov 2008
Location: Massachusetts
Posts: 4,810
Garage
Quote:
Originally Posted by Porsche Pete View Post
Yes..i think wise words.. Around £1200 budget. it Was ?? and yes that should read 20"..
Its good to get other opinions...saves wasting money too... Thanks for all yr help guys..

Have put the urgency on myself, as i have already sold my turbine jobbies on Ebay..so the chap will want to know
where they are soon !!

Think i will bite the bullet and go with the ;


Oz Alleggerita HLT Titanium in 18"



FRONT; 18" 8J ET50 225/40 or 235/40 TYRES



REAR; 18" 9J ET 43 255/40 or 265/40 TYRES

Does this sound about right?

No hassle then...all shiny brand new with some Falken 453 ... Tyres
have always liked these...dont settle for 2nds me thinks...may have to sell a kidney or two Lol..
Or better still the wifes..Lol
That's a good fit. However, I would suggest either a 265 or 275 on the rear.
__________________
Don't worry … I've got the microfilm.
Johnny Danger is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 10:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page