Go Back   986 Forum - for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Reply
 
LinkBack Thread Tools Display Modes
Old 09-08-2005, 12:01 PM   #1
Registered User
 
Join Date: Aug 2005
Location: Orlando
Posts: 100
Help installing Kenwood Subwoofer

Hi,
I just bought a Kenwood KSC-SW1 Powered Subwoofer. My stereo in the dash right now is Pioneer DEH-P3500. I figured how to hook half of it up. I am coming out of the stereo RCA outs into the RCA inputs on the Kenwood Sub-Woofer. The Subwoofer manual says it need to get powere from the battery. The back of the sub has a catridge looking port. It came with a cable that fits in there that branches out to (Batt, PCont, Stereo left & Stereo Right),
I am asuuming that I just need the Yellow which is battery and the blue which goes to the ignition.

The question I have is, how do hook the powered sub to the battery and the ignition. Where are these wires that I need to splice them into or where do they go.
thanks

Joji is offline   Reply With Quote
Old 09-09-2005, 07:36 AM   #2
Registered User
 
Join Date: Jun 2005
Location: Fort Worth, Tx
Posts: 55
Sorry don't have an answer for you but, Where are you going to put the sub?

Richard
my89_928gt is offline   Reply With Quote
Old 09-09-2005, 11:34 AM   #3
Registered User
 
Join Date: Aug 2005
Location: Orlando
Posts: 100
Hi,
I got it working. I am able to fit it on the right or left side behind the headrest. I don't have that compartment back there. It is just carpeting and a net. The sub is ok., It does the job. It has low end. Not extremly defined but not bad either.

Now that I tested it. I have two questions.

I need to run the line to the + side of the battery. How do I get from under the passenger or drivers side into the front trunk to the battery?

Next the porsche dealer said I can hook up the Blue iginition wire to the back of the fuse box. I was able to get the cover, carepeting and unscrew the 4 srews. But how do I get hte hole fuse box to come off. I need to access behind it so I can merge my wires.

If anyone has pictures, that would really help
thanks
Joji is offline   Reply With Quote
Old 09-10-2005, 11:38 PM   #4
Registered User
 
Join Date: May 2005
Location: bahrain
Posts: 44
Cool

Could You Please Pose Your Subs Pic After Installation!
donjuan143 is offline   Reply With Quote
Old 09-11-2005, 06:46 AM   #5
Registered User
 
Join Date: Jun 2005
Location: boston
Posts: 37
Take a look at the instructions for installing the pnp rear speaker kit. It describes how best to run connections from the rear of the vehicle to the front.

http://members.roadfly.com/a9dbl4/BOXSTER.pdf

rboutin is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page