Quote:
Originally Posted by jacabean
you can also try shimming out the muffler bracket with some washers , which will push it down . you can also use the shims to balance out fitment for centering the out let pipes. i used some 3/8" thick brass bushings to get good fitment.
|
That is what I am doing. I have about 20 thin washers that my work was recycling. I am going to use them as spacers and let the entire system move back further, which will make the tips stick out the bumper maybe another inch but thats okay. I just have to find longer bolts from homedepot or lowes.
I will let you know how it goes. I also put together a DIY video with new exhaust sound. I will post that in the DIY thread soon.
What I love about this exhaust is that it feels stock. No rattling. No drone. Sounds stock at idle and under 2500rpm so I won't wake everyone when leaving the house late nights. And then it turns into a GT3-like loud sound when you floor it. It is especially amazing in tunnels and under highway bridges.
Threaded Mode
