What does the immobilizer/alarm do, exactly?

[J Tinsby]

Clip is fine on a 2011 so it should surely work for you. The alarm activation is painfully slow however at least for me.

So don't be disappointed when it takes 15 secs or more to go off!

Cheers

[mikstew]

Ok, so the alarm not honking i get.

What I don't get is why the alarm doesnt go off if i reach inside and open the door while the car is locked with the top down.

The car doesnt need a motion sensor to know that someone is opening the car from the inside.

Likewise, I would imagine that if someone used a J-hook when the roof is up to open the door, I doubt the alarm would go off until they tripped the motion sensor.

Can someone else confirm that the alarm does not trigger if you do a simulated break in with the top down?

[mikstew]

ok so since noone will do my little test i will presume that opening the doors thru the roof should set off the alarm (but in my case it does not)

Well I checked my codes with the durametric and they say this:


Alarm
Current Fault Codes
________________________________________


33
No passenger compartment monitoring
Interior monitoring sensor faulty
Status: Not present
Number of times DTC present: 1
________________________________________


60
Central locking limit position locked not reached
Switch for central locking is faulty
Status: Not present
Number of times DTC present: 2




Clearly I have some sort of issue going on. How to fix these ?