Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 02-13-2011, 10:54 AM   #1
Registered User
 
Join Date: Jan 2008
Location: dc
Posts: 8
Thanks..any idea of what to look for in case the car got too hot?

Quote:
Originally Posted by JAAY
Your water pump seized up. Simple repair. Hopefully the car did not get too hot and warp anything. That is what I think happened. Make sure it is replaced with the oem porsche part.

Jay
Hi,

Thanks for the reply. I hope the repair is simple indeed! While I did not drive the car long after I noticed that it was overheating...the gauge was on the red zone. Do you know if there is anything I should look for to see if there was lasting damage to the engine as a result of the heat?

Regards

IK
ikkaro is offline   Reply With Quote
Old 02-13-2011, 11:57 AM   #2
Registered User
 
JAAY's Avatar
 
Join Date: Dec 2006
Location: shoreham, ny
Posts: 1,619
White Smoke came out of the tail pipes ? If so possibly you blew a head gasket or warped a head. Hopefully the pump just let go and spit out coolant.
__________________
996 3.4 engine with 2.7 986 5speed transmission
Ebay Headers, Fabspeed high flow cats, JIC Cross, IPD Plenum, H&R Coilovers, B&M Short Shifter, AEM Uego Gauge Type Analog, Apexi S-AFC Select, 987 air box, Litronics, 2000 Tails and side markers, painted center console, 18" 987 S-Wheels, GT3 Front bumper with splitter.
JAAY is offline   Reply With Quote
Old 02-13-2011, 06:04 PM   #3
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Good chance you cracked a head
BYprodriver is offline   Reply With Quote
Old 02-14-2011, 04:38 PM   #4
Registered User
 
Join Date: Jan 2008
Location: dc
Posts: 8
Thankfully no cracked head

Quote:
Originally Posted by BYprodriver
Good chance you cracked a head
As Jaay predicted, it was the water pump. The repair shop said that everything else was fine and that there was no need to test the head gasket. Should I follow that advise?

Here is the breakdown of the repairs:

Water pump replacement:
Labor 605
Material: Water pump $380; Multi-rib belt $80

Thermostat replacement:
thermostat with gasket $100 plus $200 for the labor.

Regards,

IK
ikkaro is offline   Reply With Quote
Old 02-15-2011, 10:25 PM   #5
Registered User
 
BYprodriver's Avatar
 
Join Date: Oct 2008
Location: O.C. CA
Posts: 3,709
Garage
Quote:
Originally Posted by ikkaro
As Jaay predicted, it was the water pump. The repair shop said that everything else was fine and that there was no need to test the head gasket. Should I follow that advise?

Here is the breakdown of the repairs:

Water pump replacement:
Labor 605
Material: Water pump $380; Multi-rib belt $80

Thermostat replacement:
thermostat with gasket $100 plus $200 for the labor.

Regards,

IK
Inspect the old pump impeller to see if any vanes came off, if they did they can lodge in the coolant manifold & cause overheating. Running the engine hot can crack the head. If it is already back together just watch for intermix or any coolant loss.
BYprodriver is offline   Reply With Quote
Old 02-16-2011, 04:41 AM   #6
Registered User
 
Join Date: Dec 2010
Location: Hot Springs Village, Arkansas
Posts: 245
Wow. Over $600 labor to replace a water pump.
Dale_K is offline   Reply With Quote
Old 02-16-2011, 06:43 AM   #7
Registered User
 
Join Date: Jul 2009
Location: Arlington Heights, IL
Posts: 1,561
Quote:
Originally Posted by Dale_K
Wow. Over $600 labor to replace a water pump.

The guy lives in DC. A dealership will be charging close to $200/hour. An indy shop will be over $110/hour. Don't know how many total hours of labor were involved, though.

Sounds like he went to a dealership.
Flavor 987S is offline   Reply With Quote
Old 02-21-2011, 07:57 AM   #8
Registered User
 
Join Date: Sep 2010
Location: northeast
Posts: 31
Quote:
Originally Posted by ikkaro
As Jaay predicted, it was the water pump. The repair shop said that everything else was fine and that there was no need to test the head gasket. Should I follow that advise?

Here is the breakdown of the repairs:

Water pump replacement:
Labor 605
Material: Water pump $380; Multi-rib belt $80

Thermostat replacement:
thermostat with gasket $100 plus $200 for the labor.

Regards,

IK
You paid too much--I recently had mine done for just under 900.00--included everything you had done plus hoses and collant flush. How could they charge you 200 labor for thermostat when they were already in there doing the water pump?
danyl55 is offline   Reply With Quote
Old 02-21-2011, 08:24 AM   #9
Registered User
 
Join Date: Jan 2011
Location: San Diego
Posts: 11
ouch unbelievable
__________________
http://unitwan.co.nr/9511.htm
MSull788 is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page