not good news today, i spent almost an hour and a half trying to single out a pulley by spraying WD 40 and listening with a stethoscope but couldn't single out a pulley. i finally pulled off the belt to try one last time with no belt and i heard it. at 3000 rpm you hear a clattering sound at 3000 rpm. the other night with the belt off i didn't hear it but today heard plain as day with the belt off wondering if it can be a collapsed lifter or a chain tensioner or a chain guide broken. I already changed the ims bearing about 2000 miles ago to the LN Engineering ims bearing. at that time the rear main seal sprung a big leak so while changing that i decided to change the intermediate shaft bearing, glad i did because it had already lost all its grease and the balls looked scored and it didn't spin smoothly at all. the motor has 42000 miles on it. now what?
Threaded Mode
