Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 09-28-2010, 06:37 AM   #1
Registered User
 
Join Date: Mar 2010
Location: Sussex
Posts: 24
Thanks for the info, much appreciated.

I shall try testing it over 5k rpm as you suggested.

My car seems to idle a little fast at times, especially when i come to a stop (say at traffic lights) after a high rpm run.

It is also running a little rich apparantly which is causing the high emission levels during my recent test,

I was told this may be the sensors, however I am not receiving any error codes. I had holes in the exhaust but these are fixed. The high-ish reving ad idle seems to be a little worse since these have been repaired, Any other ideas? I have checked airfilter and shall replace the sparkplugs soon through matter of course, I assumed the O2 sensors may be to blame, as fuel economy seems a little low, averaging around 32 miles/gallon. Is this normal?

The car is running fine though, starts fine and is causing me no real problems except a slightly high idle, generally 1k rpm, sometimes it revs up to 1.5rpm and then drops again. It makes the car infront think I am getting impatient

Any ideas would be gratefully received.

Many thanks.
Paul.
Paul Whyte is offline   Reply With Quote
Old 09-28-2010, 06:57 AM   #2
Registered User
 
Join Date: Apr 2010
Location: trenton nj
Posts: 449
check your throttle body and idle air controll valve for coking [crud]. if it failed a smog test i would think it will force a CEL . an exhaust leak can fool the 02 sensors making them think the car is lean so they richen the mix. look at injector on time [mil/sec] ....you will need normal specs to compare
extanker is offline   Reply With Quote
Old 09-28-2010, 07:04 AM   #3
Registered User
 
Join Date: Mar 2010
Location: Sussex
Posts: 24
Thanks again for the info,

Much appreciated. Will see what I can find.

Next big job is replacing the starter motor, as it is noisy on startup, clogging up on the benedics, I have a replacement and plan on reconditioning the old one to sell on ebay I shall check the throttle body and idle air control valve as you say.

Cheers
Paul.
Paul Whyte is offline   Reply With Quote
Old 09-28-2010, 07:15 AM   #4
Registered User
 
Join Date: Apr 2010
Location: trenton nj
Posts: 449
ive read people remove the starter,lube it and put it back in
extanker is offline   Reply With Quote
Old 09-28-2010, 07:19 AM   #5
Registered User
 
Join Date: Mar 2010
Location: Sussex
Posts: 24
Yup, I have instructions on how to dismantle and lube the starter, its the same starter motor as a VW apparantly. However I bought a cheap one on Ebay, that way I can do a direct replacement, and it doesn't matter too much if I drop a spring or screw down the back of the cooker while I am reconditioning it, I can still get to work the next morning haha.
Paul Whyte is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page