Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-04-2010, 07:14 AM   #1
Registered User
 
tonycarreon's Avatar
 
Join Date: May 2009
Location: Frederick, MD
Posts: 1,396
have you been sticking with the same gas ( octane rating )?

like paul said, if it's not blinking you're doing alright ( i hesitate to say okay but you know ).

many local parts shops ( autozone, advance auto, pep boys, etc. ) will read the code for you for free. might stop in there and see what the codes are.
__________________
"Speed has never killed anyone, suddenly becoming stationary... that's what gets you."
tonycarreon is offline   Reply With Quote
Old 04-04-2010, 05:42 PM   #2
Registered User
 
Join Date: Mar 2010
Location: Ottawa, Canada
Posts: 150
Garage
Quote:
Originally Posted by tonycarreon
have you been sticking with the same gas ( octane rating )?

like paul said, if it's not blinking you're doing alright ( i hesitate to say okay but you know ).

many local parts shops ( autozone, advance auto, pep boys, etc. ) will read the code for you for free. might stop in there and see what the codes are.
Well I guess I will have to check that tomorrow. Just got here in Port Huron, MI after another 10 hours! So my journey back to Canada is almost over! 3,900km so far and the car has been flawless. Even mileage is unbelievable (8.6L/100km or 28MPG).
I will definitely get that checked either tomorrow or Tuesday and fixed.
Will put the stock air box back with a genuine Porsche filter.
Awesome trip, incredible landscape and so on. But no way I will ever do it again. Next Porsche I will definitely ship or buy in the East Coast.

Cheers!

CR
crod is offline   Reply With Quote
Old 04-04-2010, 05:52 PM   #3
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
Glad to hear that you are closer to home.

I've made several such trips in my 01 (mainly to the last 9 Parades) and the one thing that got me twice was tire wear. I now make taking a look at the tires as part of the checklist before leaving each morning while doing such trips.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 04-07-2010, 06:18 PM   #4
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
I assume you made it home by now......
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 04-08-2010, 08:03 AM   #5
Registered User
 
Join Date: Mar 2010
Location: Ottawa, Canada
Posts: 150
Garage
At home indeed!
Brought the car to the mechanic and the CEL were nothing to worry about. There was a 1601 (Voltage high apparently) and some for the O2 sensors. These are getting replaced on the 21st once I get back from Australia (off to Melbourne tomorrow).
The car will need a new clutch sometime in the next 10,000 miles I think so I just ordered one and will keep it at home until time comes. Same for the RMS seal.
Other than that, perfect vehicle.
Now need to put the center console back (the car has the 'Delete' factory option) and move the air conditioning controls to the console so I can install the Navi unit. Once it is done I will post pictures for sure.

Cheers!

CR
crod is offline   Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 02:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page