Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-21-2010, 12:46 PM   #14
Engine Surgeon
 
Join Date: Aug 2008
Location: Cleveland GA USA
Posts: 2,425
Owners of vehicles are concerned with whats best for their engine.. I am also concerned with that, but I must above all else provide security for the company I started at age 13.

The only person who can cover my ass is me and if that hurts some feelings or means that some cars can't be retrofitted then so be it... We could be like most everyone else and take your money, hoping and praying you don't have a problem and then not really caring if you do... Thats not the way this company operates. I am point blank and too honest for my own good in some cases, but we stay out of trouble while everyone knows where we stand at all times. I won't tell someone what they want to hear just to get into their wallet.

What developed the tick...tick.. mind set is the bearing Engineers that offered us reports on the bearing from an analytical standpoint stated the bearing had a service life measured in hours, not miles.. The clock on that service life is ticking with every minute the engine operates and thats just a fact.

Last week I caught a bearing WHILE it was failing, unknowingly until the bearing flange was pulled. That particular engine ironically was within TWO HOURS of the target service life that was calculated by the bearing Engineer who has been assisting us... We didn't even notice it until we were logging the ECU information for our database..

Its a fact that anything mechanical can fail at any time, people who don't work with mechanical things all day, everyday and do so also as their hobby just can't understand that. I lead a life of pushing things to the extreme mechanically so failure is fairly common place. Morticians are accustomed to dealing with dead people so it doesn't bother them too much.. Same thing goes with us, when parts scatter its to be expected and I've even been known to crack a smile while picking up the pieces in the dyno cell... But that engine made 150HP per cylinder and broke about every rule on earth just by firing up.

We've fielded THREE IMS bearing calls today and 9 this week so far. I've started recording the calls with those who want to share their stories.
__________________
Jake Raby/www.flat6innovations.com
IMS Solution/ Faultless Tool Inventor
US Patent 8,992,089 &
US Patent 9,416,697
Developer of The IMS Retrofit Procedure- M96/ M97 Specialist
Jake Raby is offline   Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page