If changing gear most of the time at 6000 or 7000 rpms, will the clutch wear out quic

[Brucelee]

Turns out a moderator can't even take a few days off to visit his grandson.

Anyway, lets all chlll out here. We will NEVER resolve this issue of driving at redline. If you want to hit the RL all the time, I hope you are doing it at the track because the street is likely not the place you want to be doing these speeds.

Having said that, if you want to blow up your engine, drive it PAST redline at all times. Also, put in cheap oil and drop the clutch as often as you can. Oh, and drifting is really good for the tires also.


Nice!!!!!!!!!!!!!

[Paul]

Congrats on the grandfather thing!

I wonder how many grandfathers redline their Porsches.

[Brucelee]

Originally Posted by Paul

Congrats on the grandfather thing!

I wonder how many grandfathers redline their Porsches.

Thanks. It is a blast being a GF. The kid is a trip, and I love him totally. One of the compensations for getting older.

Not sure on the redline thing. I think time has changed what it means to be a GF.

[Paul]

Someone else shares my point of view.

From:

http://www.autofarm.co.uk/pdf/Total911_July06.pdf

"That said, he and Steve say that, if
your engine’s going to fail, there’s not
much you can do to prevent it. Although
Nick has his own pet theory: “Jonathan
Palmer Motorsport has several 3.4-litre
cars which are driven hard on the track
every day,” he says. “These engines are
running fine, whereas maybe those that
have been driven more sedately seem to
suffer problems!”

[Quickurt]

Here's a grandfather not afraid of a redline!!
From another thread today on the same subject, the VVT means never needing to shift at redline.
Proved it out at Gainesville Dragway a few weeks ago. Fastest run of three was shifting at 6200, slowest was shifting at 7000.
If I felt like going out to the garage, I'd get the tickets.
Shifting at 6200 - 14.032 @99.98
Shifting at 7000 was about 14.6 and just over 97 mph.
2006 3.2 S

[Paul]

I just like the rush to 7000 that my 2.7 has in 1st and 2ond....

[Quickurt]

Hey Paul,

How far are you from Elkhart Lake?
I got to drive past once, but they were having an IKF kart race and wouldn't let me in without joining, for like 80 bucks. SCCA was 35 bucks at the time.
Haven't had the chance to go back, but do a lot of business with a mold foundry in Portage.

[pbanders]

Originally Posted by Quickurt

Here's a grandfather not afraid of a redline!!
From another thread today on the same subject, the VVT means never needing to shift at redline.
Proved it out at Gainesville Dragway a few weeks ago. Fastest run of three was shifting at 6200, slowest was shifting at 7000.
If I felt like going out to the garage, I'd get the tickets.
Shifting at 6200 - 14.032 @99.98
Shifting at 7000 was about 14.6 and just over 97 mph.
2006 3.2 S

Don't forget that track situations often dictate driving at over the torque peak. For example, in the infield of Firebird here in Phoenix, it's better to keep the revs high (near 7K) than shifting up as you negotiate a series of tight turns, rather than shifting up and down. You'll run a faster lap time. Of course, if track time means the dragstrip, then what you're doing is the way to go.

[NickCats]

Originally Posted by Quickurt

Here's a grandfather not afraid of a redline!!
From another thread today on the same subject, the VVT means never needing to shift at redline.
Proved it out at Gainesville Dragway a few weeks ago. Fastest run of three was shifting at 6200, slowest was shifting at 7000.
If I felt like going out to the garage, I'd get the tickets.
Shifting at 6200 - 14.032 @99.98
Shifting at 7000 was about 14.6 and just over 97 mph.
2006 3.2 S

Makes sense...

( keep in mind this chart is for a 2000 Non-S )

Nick

[Jaxonalden]

You'll notice on the chart that the torque curve takes a nose dive as well at 6,200 rpm. Translation; It's time to shift.

[Adam]

Most of the rags I read say they the cars shift at redline when testing at the dragstrip and they are posting a lot better #'s than 14 flat @100mph with a 280 hp boxster S. I think R&T and C&D both hit mid 13's with a trap @105ish mph. Just food for thought.