A Division of Pelican Parts

986 Boxster Catalog | 987 Cayman Catalog | Accessories | Performance


Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Boxster General Discussions
Dead after replacing battery Dead after replacing battery
Register Garage FAQ Community Calendar Today's Posts Search

Post Reply
 
LinkBack Thread Tools Display Modes
Old 11-08-2007, 05:03 PM   #1
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
Do the keys still operate the locks and trunks?
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 11-08-2007, 05:23 PM   #2
Registered User
 
Join Date: Nov 2007
Location: NC
Posts: 11
Quote:
Originally Posted by Paul
Do the keys still operate the locks and trunks?
Yes, the key still operates the front and back latches. Good call on narrowing that down so that the key's not a factor.

Jeff
Raleigh, NC
jtimblin is offline   Reply With Quote
Old 11-08-2007, 05:26 PM   #3
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
It's common for ignition switches to be damaged when a battery is dead. Some owners think they just are not turning it far enough.

It is also common for fuses to blow when a battery is low. Have you checked all of your fuses?
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 11-08-2007, 05:35 PM   #4
Registered User
 
Join Date: Nov 2007
Location: NC
Posts: 11
Quote:
Originally Posted by Paul
It's common for ignition switches to be damaged when a battery is dead. Some owners think they just are not turning it far enough.

It is also common for fuses to blow when a battery is low. Have you checked all of your fuses?

I've checked all the fuses, and the ignition switch was replaced with a new one about six months ago. The old switch was a little flakey but still worked. I've also double checked the clutch microswitch.

It's odd that only the battery and oil warning lights come one, along with a brief appearance of the airbag light.

Jeff
Raleigh, NC
jtimblin is offline   Reply With Quote
Old 11-08-2007, 06:04 PM   #5
Porsche "Purist"
 
Paul's Avatar
 
Join Date: Aug 2003
Location: Wisconsin
Posts: 2,123
Garage
It's time to check the alarm system for error codes.
__________________
1998 Boxster with 7.8 DME, 2005 3.6 liter/325 hp, Variocam Plus, 996 Instrument panel
2001 Boxster original owner. I installed used motor at 89k.
1987 924S. 2002 996TT. PST-2
Owned and repaired Porsches since 1974. Porsche: It's not driving, it's therapy.
Paul is offline   Reply With Quote
Old 11-08-2007, 06:17 PM   #6
Registered User
 
Join Date: Mar 2006
Location: Lakewood, Ohio / Sedona, AZ
Posts: 305
Do you know anyone with a code reader? If you do see if there are any codes showing and clear them. Then give it a try. I'm not sure if it will help but it sure won't hurt it.
__________________
http://www.martinlansky.com/Coppermi...01/W_humps.jpg

'03 Midnight Blue
18" Chromes//Drilled and slotted rotors//pedal upgrade//Alum. Door sills//KSPORT Coilovers//Short Shifter/Strut braces/Clear sides/Hard Top/Speedster humps/Intake//Leather GT3 seats/REVO chip with SPS2
'04 CLK55 AMG 367HP!
'86 944 Guards Red & MINT!
'69 911 Black
PCA Member -Northern Ohio
Cancer Survivor
der Geist is offline   Reply With Quote
Old 11-09-2007, 02:49 AM   #7
Registered User
 
Join Date: Nov 2007
Location: NC
Posts: 11
Quote:
Originally Posted by der Geist
Do you know anyone with a code reader? If you do see if there are any codes showing and clear them. Then give it a try. I'm not sure if it will help but it sure won't hurt it.
Just a regular OBDII code reader? I've been wanting to pick up one of those for a while anyway. Any recommendations for places to get code translations?

Jeff
Raleigh, NC
jtimblin is offline   Reply With Quote
Post Reply


« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 12:31 AM.

Contact Us - Pelican Parts Porsche Catalog - Archive - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page