Last Call before the Scrap Yard

[78F350]

JayG's is shipped. Rob's is just about ready to send. I'm pulling the front brakes for RedTele58 and that's about all the brake parts that are left unless you want the reservoir and booster.

I'm still pulling off stuff that is easy to remove and keep in a box. The car will be gone Monday afternoon.

[itsnotanova]

I recommend grabbing the uprights and rear subframes before you scrap it. SPB guys go through those like crazy. I sold them for $50 each back in the day.

[john12312]

Do you still have the plastic/rubber moldings (see Pic) that covers the edge of the convertible top frame? If so, how much for both sides?They are probably 18" total on either side.

[78F350]

Originally Posted by john12312

Do you still have the plastic/rubber moldings (see Pic) that covers the edge of the convertible top frame? ...

It looks like you want the rubber seal and the plastic trim that screws on to clamp it in place (#9 in the diagram below):


That's fairly easy and I'll ship both sides for $20 total.

In the mean time, I looked up the portion of the frame that it screws into, #8 in the diagram, "98656193500" which the parts manual calls the B Pillar. That's almost $1,000 per side: https://www.ecstuning.com/b-genuine-porsche-parts/folding-top-pillar/98656193500a09/



I can beat that price *significantly*, but it's not an easy part to remove.