Jon in Ok's 2000 S Junk Car

[t2-bxtrs]

Hello,

Sent you a PM for Control Arm w/ good ball sockets for the roof.

Thank you

[78F350]

I unbolted the struts and drained the fuel, then pulled it over with the Dung Beetle. Now it's easy to strip the underside.

[78F350]

Originally Posted by t2-bxtrs

Hello,

Sent you a PM for Control Arm w/ good ball sockets for the roof.

Thank you

I have good rods from a couple cars, but the rubber bushings should be replaced. Bushings are available from Pelican for about $5 each. https://www.pelicanparts.com/More_Info/98656188100.htm?pn=986-561-881-00-M1253&SVSVSI=1047&fs=0
Tomorrow I'll dig out a box of Top Parts and select a pair/figure out a price.

[78F350]

The husk of the car is gone now.


I have replied to the messages that I've received. Much of the wiring harness is available if anyone needs a few connectors. I have the stripped down seat frames (no leather or padding) in case anyone can use a seat base or parts. Lots of nuts, bolts, hardware and assorted black interior trim pieces.

[78F350]

Pics, brake light "top black piece" and as-is brake light for 'junglegreen':

[junglegreen]

Thanks Jon for the 3rd tail light cover. I appreciate the quick shipment and the more than reasonable price. The 2000 Boxster is whole again!

[Boxstard]

Jon, thank you for the 3-pin connector, even with a copy of the wiring diagram, very much appreciated!