Parting out a whole lot of Boxsters

[dghii]

Received my parts already! Thank you Woodie!

Good part, very fair price, good communication and quick shipping. Highly recommend using Woodie as a parts source and will certainly purchase more parts as needed!

Thanks again.

[itsnotanova]

Originally Posted by CoBeerToad

I bought my 1997 after the PO did the center console delete. I'd like to undelete it. Do you have a black one?

Part numbers for the bracket and trim covers are (to make sure we're talking about the same thing):

996-552-115-01
996-552-091-02
996.552-092-02

I don't have any that have the double storage. I have about every other kind though. $35+shipping for all three

Originally Posted by jmccjr

Do you still have the black shifter and boot with plastic frame at the base??

I don't have any nice ones

Originally Posted by dghii

Received my parts already! Thank you Woodie!

Good part, very fair price, good communication and quick shipping. Highly recommend using Woodie as a parts source and will certainly purchase more parts as needed!

Thanks again.

Thanks

[CoBeerToad]

Originally Posted by itsnotanova

I don't have any that have the double storage. I have about every other kind though. $35+shipping for all three

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

[particlewave]

Originally Posted by CoBeerToad

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

I have the double storage shelf console only (no side trims, storage bins or front trims) if Woody doesn't.

[itsnotanova]

Originally Posted by qwerty

Hi,

I would like to purchase a passenger amber corner piece and all the bolts that hold the door interior trim.

Reference figure 1.

Pelican Technical Article: Boxster Door Panel Removal / Boxster Mirror Switch Replacement - 986 / 987

Note - my door does not have one under the airbag sticker.

Let me know if this is do-able. Thanks.

Sorry, I missed your post earlier. I don't have any good corner trim right now. PM me your address

Originally Posted by CoBeerToad

I'm not sure exactly what I would need. I'm looking to move the climate control to the bottom to install a double DIN up top. Would I need the double storage?

I have one where the hvac control was down below

[Dlirium]

Need a drivers side tail light for a 98/99 base. Got anything?

[cbbepop]

Hi

Im looking for a driver side (left) door panel
Black
with the air bag cover, speaker cover and the leather stitching running across
I think this is the real leather option correct me if I am wrong

Do you have of these door panels lying around?

THanks

[eddy]

Got my parts for the shifter boot! Thanks for helping to improve my car!

[Manuell]

I i live in Katy, Texas. I am looking for both taillights and a shifter boot. If you have wind screens will be nice. Also do you have a not amber front lights?

Thank You

Manuell

[obxwrangler]

you have any ok clutches / pressure plates around for a 1999 boxster 2.5? just looking to put one up in a project car I have to see what I am dealing with motorwise. Dont want to spend on a brand new setup if I have junk engine.shipped to 21795

[Brian0icu812]

looking for a few smaller things but most important is:
-The linkage on 2.5l manuals, that is only about 6in long and is only attached to the trans with the ball clips on both sides (mines wore out and keeps popping of)
-1 black oval for the passenger side ir/alarm thingy in the top center of windsheild
-Any cheap maf's? bought a cheap one off ebay and it now has a miss at idle (again 2.5l)
-Any smoke tail lights? red on bottom, clear or grey on top
-front license plate mount
-the cover for the cabin air filter

Other stuff that might be a possibility if i can afford
-seat memory/trunk release without yellow buttons
-manual cluster 2.5l with approx 80k miles

[itsnotanova]

PMs sent to some of you and some I need to see if I have what you're looking for before I pm you...thanks

[1rooster]

Looking for CDR 220 with or without amp

[Brad Brownell]

I need a pair of 986S front calipers, if you could get me a price, I'd appreciate it.

[John T]

Looking for power mirror switch trim in black (986)

[OnFire]

Looking for the following:

Boxster S trunk emblems

Trunk (rear) shock x2

Front center bumper intake in black (not metallic black)

Roll bar foam - center section

Rear tail lights from a 2003-2004

Colored Porsche emblem center wheel crests

Cartridge for 6 disc (or whatever it is) frunk mounted CD changer

Black OEM floor mats in good condition

Oxygen sensors (possibly)

Head light/turn signal covers - clear and bright

[t2933rm]

I Need Right and left windscreen for 1998 Boxster. Also speaker storage under top, any chance that you have any of them?

Thanks!

[itsnotanova]

Sorry guys, I was out of town all weekend picking up another vehicle 600 miles away ( not a Porsche). PMs replied

Originally Posted by Specwar

I'm looking for all black or black and silver 5 spd shift knob and boot set up.
Looking for one without worn out leather.
Thanks

I don't have a shifter knob but I do have a leather replacement in new condition for $20 shipped

Originally Posted by OnFire

I have a triple black 2000 S and I am looking for the following:

The center air intake from the front bumper, preferably in black. Mine is cracked.

The rubber gasket that runs over the roll hoops in the rear, mine is cracked.

A set of Porsche colored wheel centers, all four complete.

A set of 2003-04 rear tail lights, the white/clear tops with the red bottoms.

Thanks….

The only thing I have is the roll bar gasket. PM me so we're talking about the same thing

Originally Posted by RayW

Would you have both, or at least a drivers side windscreen?

Sorry, no windscreens. I could sell those all day if I had them

Originally Posted by Brad Brownell

I need a pair of 986S front calipers, if you could get me a price, I'd appreciate it.

Brad, I only sell complete sets of S calipers for $650 shipped.

Originally Posted by seningen

Woody,

Good to meet you too! Yes Mark's car looks awesome. What a transformation.

I do have a request -- do you have an S front bumper (or two) -- cosmetically challenged but structurally sound? could use the plastic support pieces too.

We're rebuilding the front end of our chump car... surprised how well it lined up.

We're going to make a couple nose clips -- because it's Chumps.....

Color doesn't matter. Could use a couple tow hooks too.

Mike
mike@lonestarrpm.com

Mike, The only bumper I have is the one on the red boxster and it's in about 4-5 pieces. I have a few hooks I could get rid of. I usually sell the nice ones with the spare tire kits. You're more than welcome to come out here and look around if you want or I could meet you at your garage?

Originally Posted by RedTele58

Ray - not trying to hijack if you need the pair, but I'll split them up w/ you if it works for you.

Woody - if you have a pair and Ray just needs the drivers side, - sell him the drivers side, and I need the pax side...

Thanks,

Rick

Sorry no screens

Originally Posted by John T

Looking for power mirror switch trim in black (986)

I only have a 97-99 one for $30 shipped

Originally Posted by OnFire

Looking for the following:

Boxster S trunk emblems

Trunk (rear) shock x2

Front center bumper intake in black (not metallic black)

Roll bar foam - center section

Rear tail lights from a 2003-2004

Colored Porsche emblem center wheel crests

Cartridge for 6 disc (or whatever it is) frunk mounted CD changer

Black OEM floor mats in good condition

Oxygen sensors (possibly)

Head light/turn signal covers - clear and bright

What color roll bar cushions do you need?
I have a good set of black or blue floor mats for $40 a pair
$20 for each oxygen sensor

Originally Posted by t2933rm

I Need Right and left windscreen for 1998 Boxster. Also speaker storage under top, any chance that you have any of them?

Thanks!

I don't have any screens but I do have a speaker storage on Ebay right now. It ends tomorrow

[Brad Brownell]

I'll have to think about the calipers. I really don't need the rears.

What about an Aerokit 1 rear decklid? The one that deletes the rear pop up spoiler?

[custom99]

Can you tell me up to what year are parts compatable with a 1999 boxster