986 Forum - The Community for Porsche Boxster & Cayman Owners - View Single Post

Rob175 · 02-23-2022, 08:37 AM

So.....once installed, the cups used must be larger at the top than at the bottom, since there's nothing supporting the bottom of the cup?

IF so, (don't get me wrong, your work is excellent) but I think it could be problematic to take the cup out and drink while driving. Could be difficult to grip the cup's "lip" to remove it IF the cup's rim sits too close (ie: low) to the circular ring that supports the cup.

But since you're probably designing it for YOUR OWN USE and have a specific cup in mind. As a commercial design, it might not be as flexible for other cups.

Still EXCELLENT work and a nice personal solution.

02-23-2022, 08:37 AM	#21
Rob175 Registered User Join Date: Apr 2013 Location: Lincolnshire, IL Posts: 500	So.....once installed, the cups used must be larger at the top than at the bottom, since there's nothing supporting the bottom of the cup? IF so, (don't get me wrong, your work is excellent) but I think it could be problematic to take the cup out and drink while driving. Could be difficult to grip the cup's "lip" to remove it IF the cup's rim sits too close (ie: low) to the circular ring that supports the cup. But since you're probably designing it for YOUR OWN USE and have a specific cup in mind. As a commercial design, it might not be as flexible for other cups. Still EXCELLENT work and a nice personal solution. __________________ 98' Boxster