|
When I put a nitrous system in I used those wires for the controller. Just cut that connector off and crimp on whatever connector type you want. Why keep the legacy connector?
Pin 1 - Term 30 (B+ Hot all times) - Red/Grn
Pin 2 - Term 15 (B+ Switched) - Grn/Blk
Pin 3 - Telephone Mute - Yel/Blk (wired to amp I15 and radio A3)
Pin 4 - Term 31 (Gnd) - Brn
__________________
I am not an attorney, mechanic, or member of the clergy. Following any advice given in my posts is done at your own peril.
|