Quote:
Originally Posted by JayG
Harbor Freight has a torx socket set with the correct size T55 IIRC
|
Thanks for that info. I wasn't sure if it was T50 or T55. My Torx bit set went from T40 straight to T60.
Quote:
Originally Posted by WorkInProgressK
If you don't get noise don't put them. I was thinking the same when I installed my performance HP+ pads. I WAS WRONG. Night and day difference with the damping plates. The noise would be unbearable.Then again I run drilled rotors because its the Carrera discs on the boxster S. You may not need it with slotted and plain discs. Just use a flat screwdriver or butterknife or pry them off and try not to bend them. You can install them later on by removing one pad at a time and sliding them in. It is just easier with the calipers off.
|
They were not on my brakes. I would have to purchase new ones. I never had brake noise prior to installing the new pads and rotors and don't have any noise currently. My rotors are directional drilled and EBC Red Stuff brake pads.