Quote:
Originally Posted by Coffinhunter
Ran into questions. 1st saw no ac Vent to remove. But that doesn't matter. I removed the screws from the blower cover but couldn't get the blower assembly out.
At this point I changed strategies and went through the battery area. Cleaned what I could, and put it back together.
I went to put the blower cover back on, and now it won't fit back together. What kind of contortionist do you have to be?
Is it different on a 2003 than your car?
Sent from my iPad using Tapatalk
|
the reason for the fan not sliding out, is the fact that the the wires (see pic 6) and the vent are holding it.
the ac vent is behind the dashboard.
if you removed the cover, make sure you slid it back in the correct orientation, as it can be reversed.