Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Show and Tell Gallery

Post Reply
 
LinkBack Thread Tools Display Modes
Old 08-05-2006, 07:20 AM   #1
Registered User
 
Brucelee's Avatar
 
Join Date: Jun 2004
Location: Des Moines, IA
Posts: 8,083
Very very nice indeed!!!!!!!!!!!!!
__________________
Rich Belloff

Brucelee is offline   Reply With Quote
Old 08-05-2006, 12:51 PM   #2
KronixSpeed
Guest
 
Posts: n/a
sweeetttt. ya boggtown don't worry about the peer pressure...take your time doing up the ride. every summer i do one thing to the car...something to freshen it up and feel new again.

hey the center caps look good also. i see the same center caps on alot of different type of rims, they look good.
  Reply With Quote
Old 08-05-2006, 01:56 PM   #3
boggtown
Guest
 
Posts: n/a
I already changed the center caps to porsche ones. It looks better, but would look a lot better if the center of the wheel had a little bit bigger hole, so it would fit right.
  Reply With Quote
Old 08-08-2006, 01:37 AM   #4
boggtown
Guest
 
Posts: n/a
Well, it turns out they think the vibration is because of the lug nuts. They new rims have a different taper and the original lugs wont seat it right. The new ones are comming in wednesday. BTW when we spun the wheel you could see it was a little off center, just a fyi for you other aftermarket wheel owners. (check the taper before you buy)

Last edited by boggtown; 08-08-2006 at 01:46 AM.
  Reply With Quote
Old 08-09-2006, 02:53 PM   #5
boggtown
Guest
 
Posts: n/a
The new lug bolts fixed it. Besides, they are chrome and look a lot better.
  Reply With Quote
Old 08-13-2006, 09:50 PM   #6
boggtown
Guest
 
Posts: n/a
Sorry to bump this thread again, but Kronix, did you have any trouble centering the wheel on the hub? Did you get new bolts, hub centric ring, ect... or did everything just go on perfectly the first time?
  Reply With Quote
Old 08-14-2006, 06:35 AM   #7
KronixSpeed
Guest
 
Posts: n/a
Hey,

i also had to put the hub centric rings, although it was a tight fit, they went on. i did put longer bolts on the rear because i used a 7mm spacer. so it really did not go on perfectly. hope this helps.
  Reply With Quote
Post Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page