My Latest Additions

[trieullionaire]

Originally Posted by hi-boxster168

Awsome work! I am in process of installing a momo hub for a new steering wheel. Do you have any instructions or pointers on the install? Do I need the spacer that momo is talking about and what did you do to disable the airbag warning. If you used the spacer what does it look like and where can I get one. Thanks in advance! Aloha

Hi-Boxster168,

Yes, there is a steering wheel hub adapter you will need that is from MOMO...The replacement is fairly simple, you shouldn't have problems with it. Link to the part: http://cgi.ebay.com/ebaymotors/MOMO-Porsche-Boxster-Steering-Wheel-Hub-Adapter-_W0QQcmdZViewItemQQhashZitem45f48cd19eQQitemZ30045 5612830QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[cbbepop]

wow pristine.

& I always wanted a two tone leather seat interior. This color-plus just might be the affordable DIY solution :dance:

[Jake D]

Im my sig is a pic of my car with tinted tails and 3rd brake light. Basically sanded them down with a foam sand paper rated at 1000 grit. Mixed up some clear as usual then added some black paint to it. Did the same to my heads and markers which I think looks really good on the black car. The fronts are not nearly as dark and need redone because of the bugs/rocks. Just sprayed the tails an extra time or 2 to get the effect I was going for

[Christian H]

Best thread hijack ever

Nice looking Boxster Jake

[trieullionaire]

My clutch started to slip recently, it's currently at 156,000 miles now...I figure since the 2.7 engine has relatively little you can do to upgrade the DME for increased performance, I would upgrade my clutch and flywheel since I have to replace the clutch regardless.

So the Aasco LWF and SPEC Stage 2 clutch kit has been ordered and I should have it installed by next week. I will keep you guys posted on how it performs, hoping it feels like driving a new Boxster again but perhaps with a bit more ooomph! Excited to have my car back to drivability...