Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

Post Reply
 
LinkBack Thread Tools Display Modes
Old 04-02-2022, 05:41 AM   #1
Registered User
 
Join Date: Feb 2017
Location: Stockholm
Posts: 374
Garage
DIY adjustable toe link with bump steer

Trying to DIY a adjustable toe link with bump steer. Now all I need to find is a heim joint pin with enough length and...The Porsche-angled taper. The taper part is where I'm stuck.. When I measure the oem pin I find that it's something like 5,5 degree. Not sure I'm accurate enough.

Any ideas?

Robert986 is offline   Reply With Quote
Old 04-02-2022, 07:26 AM   #2
Registered User
 
Join Date: Feb 2017
Location: Stockholm
Posts: 374
Garage
Measured on the steel insert in the hub and now I get it closer to 4,5 degrees taper.

Anyway, I might found what I'm looking for, RSS has a separate pin made fot the 986. It looks kind of short to handle bump steer but It's supposed to work so..


Robert986 is offline   Reply With Quote
Post Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 04:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page