DIY adjustable toe link with bump steer
 

Trying to DIY a adjustable toe link with bump steer. Now all I need to find is a heim joint pin with enough length and...The Porsche-angled taper. The taper part is where I'm stuck.. When I measure the oem pin I find that it's something like 5,5 degree. Not sure I'm accurate enough.

Any ideas? http://986forum.com/forums/uploads02...1648906894.jpg

Measured on the steel insert in the hub and now I get it closer to 4,5 degrees taper.

Anyway, I might found what I'm looking for, RSS has a separate pin made fot the 986. It looks kind of short to handle bump steer but It's supposed to work so..

http://986forum.com/forums/uploads02...1648913147.jpg