Engine bay switched 12v power

[Starter986]

In the trunk. The relay box driver side. Slot/spot #10. I've switched power running a couple wires out of where the relay sits. I don't recall into where the two wires run. My mechanic brought to my attention that's where I'm missing the relay for the SAIS.

Power comes on when ignition is turned on. Shuts off power about 15 seconds after the key is removed.

[jaykay]

Originally Posted by Starter986

In the trunk. The relay box driver side. Slot/spot #10. I've switched power running a couple wires out of where the relay sits. I don't recall into where the two wires run. My mechanic brought to my attention that's where I'm missing the relay for the SAIS.

Power comes on when ignition is turned on. Shuts off power about 15 seconds after the key is removed.

Any chance you can post an image of this relay? Then I might be able figure out what is on that circuit and permissible current draw.

[Starter986]

Originally Posted by jaykay

Any chance you can post an image of this relay? Then I might be able figure out what is on that circuit and permissible current draw.

I don't have a relay in that #10 spot... so informed by my mechanic. (That would explain why never have I heard my SAIS come on.

Use an electical testor in the slot where the relay goes to find which "power" is ON. The two slots in mine power up when the car is turned on and shuts off about 15 seconds after the key is removed. I do not know what is the current draw.