So... I have this spare engine.

[redpepperracing]

Originally Posted by elgyqc

There is some scoring on the camshaft bearings that are beside the chain on bank 2 . All other bearings are perfect. I a have started another thread on that subject, with photos.
https://986forum.com/forums/performance-technical-chat/85802-scoring-camshaft-bearings.html#post660736

The chain tensioner pads are worn, but I have seen worse.

One of my pads was worse than those, yours are more evenly worn than mine were. I saw your other thread, not sure if that will be an issue or not, I don't think mine had any noticeable scoring. I did have some large scoring on the oil pump cavity, I'm leaving it for now, but at least it's replaceable if I need to.

I would recommend dropping the oil pan if you haven't already, there could be surprises in there. Ask me how I know!

[Lucas2024]

Congrats on the success!







__________________________________________________ __________________________________________________ _____________________________
skysmotor.co.uk sells the following products online: brushless electric motor, servo motors, stepper motor drivers, planetary gearbox and can be purchased online if required.