SOUL Performance Exhaust (Muffler) Bypass Valve

[maytag]

Originally Posted by Goldenzrule

Anyone know if the muffler bypass can be wired to a switch in the dash, rather than a key fob? I like the Soul piece and have heard sound clips, but do not want a key fob. If I can wire to a switch, I'll likely go this route. If I cannot, I'm going to have to keep searching for something else.

Anything can be done. But their kit isn't ready for that. You'd need to tap the wires yourself..... which would be very, very easy, if you're handy at all.

Sent from my SM-G970U using Tapatalk

[Goldenzrule]

Originally Posted by maytag

Anything can be done. But their kit isn't ready for that. You'd need to tap the wires yourself..... which would be very, very easy, if you're handy at all.

Sent from my SM-G970U using Tapatalk

I haven't seen what their control unit looks like. If it has easy to locate solder points, I suppose it would be a rather simple task

[maytag]

Originally Posted by Goldenzrule

I haven't seen what their control unit looks like. If it has easy to locate solder points, I suppose it would be a rather simple task

It's simply a receiver (requiring 12v power) and a transmitter on the fob.
But from the receiver, it's two wires to the solenoid. You'll simply cut the receiver off of those two wires and wire-in a switch instead of the receiver. There's nothing to it. Except voiding the warranty. ;-) (I really doubt John would care that you forego the fob. Hell, they'd probably sell it to you without the controller. But don't plan on that saving you $15. I but receivers like that on Amazon all the time for under $15)

Sent from my SM-G970U using Tapatalk

[TTGator]

This was one of the few threads I found when looking for info on how to install this thing. Just finished the job and made a detailed install video so figured I'd post here in hopes to help someone else looking for the same info

https://youtu.be/8hqX43ak-as