Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-19-2018, 02:37 PM   #6
Registered User
 
since95's Avatar
 
Join Date: Nov 2017
Location: Massachusetts
Posts: 44
Dave80GTSi, I had electrical gremlins in my '94 348 Spyder F car. I found all the grounds corrode on the Italian cars and had a guy at a car show recommend Stabilant 22 after I cleaned them all off. I guess it is used to improve the connection between 2 wires/pins then sort of seals it off. All I can tell you is I had 2 dealers tell me I needed a new HVAC ECU, after spending $1500 on sending mine back to Italy to have it rebuilt. Instead of that I pulled off every ground to body wire (there was a ground bar behind the gauge cluster), cleaned them off, put Stabilant 22 on each wire, and re-connected.
Suddenly EVERYTHING worked! The electrical problems I was having never re-appeared after 10 years. I haven't had need to do anything like that since, but if I were in your situation I would do the Stabilant since I had such good luck with it on the Ferrari.
since95 is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 11:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page