Go Back   986 Forum - The Community for Porsche Boxster & Cayman Owners > Porsche Boxster & Cayman Forums > Performance and Technical Chat

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-07-2016, 08:22 AM   #3
Registered User
 
Join Date: Aug 2015
Location: St. Paul, MN
Posts: 12
itsnotanova is probably correct. You have likely damaged the pump. The TC seats into the pump to drive it. The tabs aren't all that hefty, so if it's not FULLY seated and/or you force it on, it will be damaged. The pump is fairly easy to swap from one box to another. Remove the trans and set it on end, bellhousing facing up. You'll need to remove all the bolts from the front flange inside the bellhousing and the pump can be pulled at that time. Lift and wiggle, it WILL come out. The new one literally drops right in.

On the reinstall, make sure the TC is FULLY seated in the transmission. It helps to have one person hold the output shafts and the other set the TC in place and then slowly rotate until you feel the tabs catch, then the TC should just pop into place with a little even pressure. It's obvious when it drops into place, so if you're not sure, remove it and try again.
JTapper is offline   Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -8. The time now is 01:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page