Quote:
Originally Posted by Gelbster
Do you touch the gas pedal before you turn the key when you start from cold ?
If you cycle the ignition switch twice before trying to start, does that make a difference ?
Stalling when you hit the gas suggests it is getting insufficient fuel/too much air. Dirty MAF ?
But why speculate? What does Herr Durametric say? Any MIL or code?
|
Never touch the gas pedal before turning the key. Tonight when I gave it a start the engine fired right up and idle at about 1000 rpm. Odd that it didn't do the usual slow idle. I don't have a durametric so I can't check. It means a trip to the shop.
Threaded Mode
