installing brey kraus roll bar extension on 986

[56 Spider]

Yes, there should be two side plates that go over the seat belt anchors, then two bolts secure the roll bar to the plate.

[jonasjmac]

thanks, thats what i thought, when i bought it was told "everything you need is there", well off to find plates and bolts

[steved0x]

Here are the instructions and you can see the side plates in Step 8:

http://qnuwm.rpstd.servertrust.com/v/vspfiles/instructions/R3010.pdf

Is there a chance that they are bolted on already to the bar? At the ends of the bar is there a circle, and then 2 round hex bolts holding on a small metal piece to the bar?

BK is really good to work with and they might be able to hook you up with just the plates and hardware (they sell a hardware kit already but you could get it cheaper from a place like Fastenal, I can give you the sizes tonight if you need), and I would file a claim on the seller if you did it through paypal/ebay and have them cover it for you.

Contact info for BK is here:
BKAuto.com - Brey-Krause Performance Driving Accessories

You can call them and ask to speak to an engineer and there is a chance you may talk to the guy that designed the bar. I have called them a few times with questions and they are always very good to talk to.

Steve